A Complete Beginner’s Guide on How to Use Hayati Pro Max Plus

New to the Hayati Pro Max Plus? Learn how to set it up, take your first puff, read the screen, charge it and fix common problems.

Quick answer: To use a Hayati Pro Max Plus, remove all the seals, press the 10ml container onto the 2ml pod and push the pack into the device until it clicks. Wait about 10 seconds, then inhale gently through the mouthpiece. There are no buttons: it fires when you draw. Charge it with a USB-C cable when the screen shows the battery is low.

New to the Hayati Pro Max Plus? It's one of the easiest pod kits to get started with. This guide takes you from opening the box to your first puff, plus how to read the screen, charge it and fix common problems.

What's in the Hayati Pro Max Plus

The Hayati Pro Max Plus is a rechargeable prefilled pod kit with two parts:

• The device: an 850mAh rechargeable battery with USB-C charging and a screen that shows the battery and e-liquid level. It's draw-activated, with a mouth-to-lung (MTL) draw.
• The refill pack: a 2ml prefilled pod with a built-in mesh coil, plus a 10ml prefilled container that feeds the pod automatically. Each pack is rated for around 6,000 puffs (the maker's estimate; real use varies).

Refill packs come in nic salt e-liquid at 5mg, 10mg and 20mg. A USB-C cable isn't always included, so check the box before you need to charge.

How to Set Up Your Hayati Pro Max Plus

1. Check the battery. Look at the screen. If the battery is low, charge it with a USB-C cable first.
2. Remove all seals. Take off any stickers, silicone plugs or caps from the pod, the container and the device. A seal left in place can stop the e-liquid flowing or the device firing.
3. Join the pod and container. Press the 10ml container firmly onto the 2ml pod until they connect securely.
4. Insert the pack. Push the joined pod and container into the device until you feel or hear it click into place.
5. Let it fill. Wait about 10 seconds so e-liquid can flow from the container into the pod and soak the coil.
6. Take your first puffs. Take a few short, gentle puffs to prime the coil, then vape as normal.

How to Vape the Hayati Pro Max Plus

There are no buttons or settings. Place the mouthpiece between your lips and draw gently: the sensor fires the coil automatically. The Pro Max Plus has an MTL draw, so draw the vapour into your mouth first, then inhale, much like a cigarette.

• Take slow, steady puffs rather than short, sharp ones.
• Avoid chain vaping, especially when the e-liquid is low, to prevent burnt hits.
• Store the device upright when you're not using it.

Reading the Screen

The screen shows how much battery and e-liquid you have left. When the e-liquid level is low, fit a new refill pack. See our step-by-step refill guide for how.

Charging Your Hayati Pro Max Plus

• Charge it with a USB-C cable. A full charge takes around an hour.
• Charge it before the battery is completely flat.
• Unplug it once the screen shows it's full.

Common Problems and Fixes

• Not firing: check every seal is off, the container is pressed firmly onto the pod, the pack has clicked in and the battery is charged.
• Burnt taste: the pack may be empty, or you may be chain vaping. Check the e-liquid level on the screen and slow your puffs.
• Weak flavour: take the pack out and push it back in until it clicks. If the e-liquid is low, fit a new pack.

Final Thoughts

Using a Hayati Pro Max Plus is simple: unseal the pack, join the pod and container, click it in, wait a few seconds and draw. Keep it charged, watch the e-liquid level on the screen and swap in a new pack when it runs low.

Vapes are for adult smokers aged 18 and over. If you don't smoke, don't start vaping.

Related Guides

• How to change the pod on a Hayati Pro Max Plus
• How long does a Hayati Pro Max Plus last?
• Hayati Pro Max Plus review