How to Change Pod on Hayati Pro Max Plus – Easy Step-by-Step Guide
A simple step-by-step guide to changing the pod on your Hayati Pro Max Plus, from spotting when it's empty to getting a smooth first puff from the new one.
Quick answer: To change the pod on a Hayati Pro Max Plus, pull the old pod and its 10ml container straight out of the device. Remove the seals from a new pod and container, press them together and push them into the device until they click. Give it about 10 seconds to fill, then take a few gentle puffs. The pods are prefilled and not made to be refilled, so replace the pack when the flavour fades or the vapour drops.
Changing the pod on your Hayati Pro Max Plus takes less than a minute once you know how it works. This guide covers when to replace the pod, how to remove it safely and how to fit a new one for smooth flavour from the first puff.
Understanding Hayati Pro Max Plus Pods
The Hayati Pro Max Plus uses sealed, prefilled pods. Each 2ml pod has its own coil built in and is fed by a 10ml prefilled container that clips onto it, so there are no tanks to fill and no coils to change. The device is draw-activated, so there are no buttons: you inhale and it fires.
Because the coil comes with every pod, each new pod gives you a fresh coil and consistent flavour. When the liquid runs out or the taste fades, you simply swap the pod.
When to Replace Your Hayati Pro Max Plus Pod
Your Hayati Pro Max Plus will give you clear signs when the pod is nearly finished:
- Little or no vapour when you inhale
- Faded flavour or a sharp, burnt taste
- A tight draw or uneven airflow
- The e-liquid level on the screen is low or empty
If you notice any of these, it's time to fit a new pod.
Can You Refill Hayati Pro Max Plus Pods?
No. Hayati Pro Max Plus pods are prefilled and sealed, and they are not designed to be refilled. Forcing a pod open to refill it can cause leaks, burnt hits, weak flavour or damage to the device. When a pod runs out, replace it with a new genuine Hayati Pro Max Plus 6K pod.
How to Change the Pod on a Hayati Pro Max Plus (Step by Step)
- Pull out the old pod. Hold the device in one hand and pull the pod and its container straight up and out with a firm pull. Pulling straight protects the contacts.
- Wipe the contacts. Use a dry tissue or cloth to wipe the metal contacts inside the device. Clean contacts give a solid connection and help avoid misfires or weak hits.
- Unseal the new pod and container. Remove any stickers, silicone plugs or caps from the new pod and its 10ml container. These must come off for the e-liquid to flow and for air to pass through.
- Join the pod and container. Press the container firmly onto the pod until they connect securely.
- Insert the new pod. Push the joined pod and container into the device until you feel or hear it click into place.
- Let it fill. Wait about 10 seconds so e-liquid can flow from the container into the pod and soak the coil.
- Take a gentle test puff. Take a few slow, gentle puffs to prime the coil. If the flavour is smooth and the airflow feels right, you're ready to go.
Tip: Slow, gentle puffs help the coil last longer and keep the flavour consistent.
Using Your Hayati Pro Max Plus Properly
To get the best from your device, keep the pod seated properly, keep the contacts clean and keep the battery charged. Avoid chain vaping when the liquid is low, as this can burn the coil and spoil the flavour.
Wondering whether it's worth it? Read our Hayati Pro Max Plus review.
Next step: get the right replacement pods
Pods only fit the kit they're made for, so buy pods with the same name as your device. Shop Hayati Pro Max Plus 6K pods, or get a new Hayati Pro Max Plus kit.
Final Thoughts
Changing a Hayati Pro Max Plus pod is quick: pull the old one out, wipe the contacts, unseal the new pod, click it in and give it a few seconds to soak. Always use genuine pods to keep your device working at its best.
Vapes are for adult smokers aged 18 and over. If you don't smoke, don't start vaping.
Related Guides
Frequently Asked Questions
Change it when the flavour fades, the vapour drops or the draw feels tight. Each pod is rated for up to 6,000 puffs, but real use varies.
No. The pods are prefilled and sealed and are not designed to be refilled. Replace the pod with a new genuine Hayati Pro Max Plus pod when it runs out.
Check that every seal and plug is removed from the pod and container, that the container is pressed firmly onto the pod and that the pack has clicked fully into place. Wipe the contacts, give it about 10 seconds to fill and make sure the battery is charged.
Wondering what nic salts are? This guide explains how they differ from freebase e-liquid, how to use them and which brands to try.
By Muhammed | 02-05-2026 13:58 PM
Don’t know about Vaping? Want to get some information related to it? Then you are at the right place. This article will help to answer most of your queries regarding vaping.
By Muhammed | 02-05-2026 13:43 PM
Vaping is taking the UK by storm, with more people quitting smoking for e-cigarettes in search of a smoother, cleaner experience. But here’s the catch: many vapers are jumping on the bandwagon without knowing how to properly take care of their devices and how to maintain a vape device. The result? Leaky tanks, burnt flavours, and a less-than-satisfying vape. Don’t worry, though, as we’ve got you covered with all the vape maintenance tips and vape device care tricks that can help you keep your vape running smoothly and tasting great every time.
By Muhammed | 02-05-2026 13:34 PM
A vape tank is the heart of your vaping kit. It contains the coil and your favourite flavour juices. This is where the magic happens for your mesmerising journey: delicious taste and flavourful clouds. Vape tanks allow e-juice to soak into the wick, which comes into contact with the coil. When you take a puff from the mouthpiece, it heats up the e-liquid and turns into vapours. This blog is for you to explore the best vape tank 2025! Vape tanks are primarily compatible with vape mods or pen-style puffing devices.
By Muhammed | 02-05-2026 13:09 PM