Easy Steps To Avoid Burnt Coils - A Guide To Extending Your Vape Coil's Lifespan

Vaping has taken the world by storm everywhere you look, gaining popularity as a trendy alternative to traditional smoking. It comes with a vast array of exciting flavours and various vape devices. 

One crucial component of a vaping kit is the coil! A vape coil is responsible for heating the e-liquid and producing vapours. If you’re a vaping enthusiast, you know that burnt coils are the bane of your vaping experience. 

A burnt coil not only makes the flavour of your e-liquid awful, but it also reduces the lifespan of your vape coil, leading to frequent replacement and, above all, additional expenses. Don’t fret; in this blog, we’ll walk you through some foolproof ways to prevent your coils from burning and extend the longevity of your vape device. 

Understanding Vape Coils - An Overview:

"Vape coils are the heart of a great vaping experience, providing the perfect harmony of flavour and vapours."

A vape coil is a small heating component made from wire wrapped around a wick that absorbs the e-juice . This is designed to produce vapours; when the e-liquid comes into contact with it, it vaporises, allowing the users to inhale the aerosols. You can find a variety of coils in the market, each offering different resistances and attributes. Some common types include single-coil, dual-coil, and mesh coils. Different materials like Kanthal, Stainless Steel, and Nickel manufacture these coils.

Here’s a quick overview of the different types of coils available in the market!

Coil Type



Flavour & Vapour Production

Ceramic Coil



Intense flavours and smooth draws

Stainless Steel Coil

Stainless Steel



Titanium Coil




Kanthal Coil

Kanthal (FeCrAl)



Nickel Coil




Sub-ohm Coil



Very High 

Plus-ohm Coil




Foolproof Ways To Avoid Burnt Coils:

Whether you’re a newbie or an experienced vaper, these steps will ensure you enjoy your vaping sessions to the fullest without any harsh experience. Are you ready for this informational ride? So, let’s get started!

Prime Your Coil:

To extend your vape coil’s lifespan, you can first prime it properly. Before replacing a new coil, add a few drops of e-juice to the cotton-wicking material. Allow it to sit for 10 minutes before installing the coil to ensure it’s fully saturated. This prevents the coil from burning when you activate your vape kit for the first time.

Start With Low Wattage:

After priming your coil, start at a lower wattage setting on your mod. Gradually increase the wattage until you reach your preferred vaping temperature. This gradual ramp-up ensures that the coil heats evenly, preventing it from getting burnt due to sudden high temperatures.

Keep Your Pod Filled With E-liquid:

Remember to mind your e-juice level above the minimum line in your pod. Vaping with less e-liquid can lead to coil exposure to dry spots and excessive heat, leading to burnt hits. Regularly check your e-liquid level and refill when necessary to avoid this issue.

Prevent Chain Vaping:

Do you know what chain vaping is? Taking rapid consecutive puffs can overheat the coil and cause it to burn out quickly. So, giving your coil a chance to cool down between vaping, especially during extended vaping sessions, is essential. This prolongs the coil’s life and avoids overheating the device itself.

Regularly Clean Your Tank:

Some residues and gunk from e-liquids can accumulate in your tank, disturbing the flavour and performance of your coil. You have to keep your vape tanks clean to avoid these issues. Here are a few simple steps to ensure your vape tank's cleanliness:

  • Disassemble your tank and clean it thoroughly using warm water. 
  • Use mild soap to clean thoroughly.
  • Rinse again and let it air dry.
  • Optionally, clean the coil too.
  • Reassemble and refill with e-liquid. Enjoy!

Watch Your Vape Device Wattage:

Different coils have recommended wattage ranges, usually indicated on the packaging or coil itself. Stick within these ranges to avoid burning out your coils prematurely. Exceeding the recommended wattage can rapidly degrade the coil's wicking material, leaving an unpleasant burnt taste.

Adjust Airflow Appropriately:

The airflow setting on your tank affects the coil's temperature. Closing too much airflow can lead to higher temperatures, potentially causing the coil to burn out faster. Conversely, keeping it wide open may result in a cooler vape, preserving the coil's life. Experiment with airflow settings to find the right balance for your preferences.

This table provides concise steps to avoid burnt coils while vaping!

Prevention Methods


Use Recommended Wattage

Stick to the recommended wattage for your coil

Prime New Coils

Dampen new coils before use to prevent burning

Avoid Chain Vaping

Allow breaks between puffs to prevent overheating

Monitor E-liquid 

Keep e-liquid above the minimum to avoid dry hits

Adjust Airflow

Find the right airflow balance to avoid overheating

Avoid Overly-Sweetened E-liquids

Choose cleaner e-liquids to prevent gunk buildup

Store Coils Properly

Keep spare coils cool and dry to maintain quality

Wrap Up!

Taking care of your vape coil is essential for a satisfying and cost-effective vaping experience. By following the above-mentioned easy steps, you can avoid burnt coils and prolong the life of your vaping device.
If you’re still confused about how to keep your coils away from burning, you can contact our customer support team. They are highly professional and will guide you in choosing the perfect vape device and how to maintain it to get the most out of the device.

If you're interested in getting more tips on how to keep your vape kit in good condition, be sure to visit our blog, How to Maximise IVG Bar’s Potential With Proper Maintenance

With a little care and attention, you can enjoy a prolonged lifespan for your coils and a more enjoyable vaping journey overall. Happy vaping!